WOW101-KA-Diesel

Decoder
SKU: 1533
    Description

    The WOW101 is a universal decoder for locomotives with DCC-ready 9-pin plugs, or which cannot accommodate a motherboard or WOWKit. This decoder may be hard-wired or plugged directly into any locomotive with a 9-pin JST plug. The WOW101 is compatible with any T-Series harness, and also includes an auxiliary harness for attaching your speaker, AUX input, Keep Alive®, and for the additional lighting functions (F3 and F4). The WOW101-KA-Diesel decoder includes a KA3 Keep Alive® included on the auxiliary harness.

    NOTE: WOW101 decoders do not have on-board resistors. If you are going to use LED lighting with this product, you must include external resistors.

    For a complete list of sounds, check out the "Sounds List" under the "Documents" tab.

  • CD-Quality Sound:
  • TCS' world-renowned CD-quality sound. 16 Bits of resolution at 44.1kHz sample rate.

  • Keep-Alive®:
  • Included on-board for smooth, stutter-free operation.

  • Back EMF Load Compensation:
  • Provides superior slow speed control and high performance under load.

  • Quiet Drive:
  • Super-quiet motor control for "buzz" free motor performance.

  • Variable Momentum:
  • Allows you to make custom acceleration and deceleration curves.

  • Incandescent Bulb Support:
  • This decoder can be used with 12 Volt bulbs.

  • Function Remapping:
  • Buttons 0 through 12 may be used to control the lighting functions of this decoder.

  • Programmable Lighting Effects:
  • Choose from 20 separate user-programmable lighting effects!

  • Dimmable Brightness:
  • Configure multiple different brightness levels for your LED's or incandescent bulbs.

  • Decoder Lock:
  • Feature which prevents accidental/unwanted programming while activated.

  • Airwire™ Compatible:
  • Fully compatible with Airwire™ operation.

  • Audio Assist®:
  • TCS exclusive auditory feedback programming system. Program your decoder without the need to memorize CV's!

  • User-Loadable Speed Tables:
  • Configure custom speed curves and set speed limits.

  • Throttle Modes:
  • Choose from multiple throttle modes to meet your operating needs.

  • Proto Notch™:
  • A WOWSound original feature which uses TCS’ exclusive auto-adjusting BEMF technology to automatically choose the active notch sound. Prototype Mode also offers dynamic sound volumes which accurately model the real-life equivalent. Also includes pre-programmed acceleration and deceleration values.

    Interface Type
    Hard-Wire
    Direct-Plug (9-Pin JST)
    Dimensions (L x W x H): 1.35" x 0.658" x 0.22" or 34.29mm x 16.72mm x 5.59mm
    Scale: HO Scale
    Continuous/Peak: 1.3/2.0 Amp
    Total Functions: 6
    Function Rating: 100 mA
    12V Outputs
    6

    Speaker Selection

    • This decoder is optimized for 8 Ω speakers (not included).
    • This decoder uses and audio amplifier capable of supplying up to 2 Watts of power to an 8 Ohm load at maximum volume. An 8 Ohm speaker with a 1 Watt minimum power rating is recommended for use with this decoder as it comes out of the package. If you are using an 8 Ohm speaker with a power rating of 2 Watts or less, you must reduce your master volume to prevent speaker failure or amplifier stress.
    • The amplifier(s) on a WOWSound product can support speakers with impedance ratings as low as 4 Ohms. A reduction in impedance will require a higher power dissipation rating (more Watts) on said speaker. The minimum power requirement for a 4 Ohm speaker is 4 Watts. If you are using a 4 Ohm speaker with a power rating of 4 Watts or less, you must reduce your master volume to prevent speaker failure or amplifier stress.
    • Speaker enclosures greatly increase speaker performance in most cases - improving the apparent volume by more efficiently directing the flow of air and reducing or eliminating destructive interference.

    Decoder Literature

    Download WOW101-KA-Diesel.pdf (1.24 MB)

    Programming Tools


    Comprehensive Guides


    Sounds List


    Video Tutorials

    Please view our library of instructional videos at tcsdcc.com/videos for helpful information on using this product.

    Wiring Diagram

    One Year Goof Proof Warranty

    All decoders are covered by a one year goof proof warranty. Please return in a small box.
    You MUST register the failed decoder on our website at tcsdcc.com/warranty
    Follow the instructions on the website before returning any decoders to TCS.